Power Tools Storage Organizers and Cabinets, Drill Charging Station, 5 Drill Hanging Slots, Wall Mount Impact Drivers Storage Dock with Widened Room for Circular Saw, Impact Wrench, Screwdriver Drill

• Updated Power Tool Stands with More Space: Widened room on the top layer for more tools, allows to amount 2 power strips on the top, special design with groove for tidy up power cables. Extra 2 more cabinets for different kinds of power tools.

• All in One Tool Stands: Design with 23.9(L)*8.9(W)inch, (83.5(L)*22.5(W)cm) inclined plane for placing screwdrivers, skill saws, reciprocating saws, flashlights or other battery operated tools. Drill hanging slots and the lower cabinet 18.3(L)*9.4(W)inch, (46.5(L)*24(W)cm) allows to contain more than 5 drills. 2 Storage Organizers, 13.8(L)*4.3(H)inch (35(L)*11(H)cm), 13.8(L)*7(H)inch (35(L)*18(H)cm), on the right side for impact wrench, circular saw, reciprocating saw, tool case and others.

• Heavy Duty Wooden Garage Tool Storage Shelves with Excellent Craftsmanship-Made of heavy solid wood, stable and fixed, moisture proof, anti-erosion, practical, sturdy,fashion and beautiful. The surface of each board is polished and painted, smooth and without pungent odor. Dimensions of the cabinet : 33.9*9.8*17.7inch (86 (L) * 25 (W) * 45 (H)cm), Weight : 22.4lb (10.17KG).

• Easy to Assemble with All the Assembly Equipment-Come with instructions, components and parts, install around 20 minutes. The surface of each board is polished and painted, smooth and without pungent odor. The edges and corners of each board are polished and will not scratch your fingers.

• XCSOURCE tool storage rack has a variety of practical features and is the best helper for your finishing tools, The power tool charging station and organizer is a must for anyone trying to tidy up their workshop.

Was missing directions. Not a big problem but it turned a 45-minute assembly into an hour and a half assembly. More importantly, the piece itself is of decent quality. I'd say it's light duty. Some parts did not align properly and the screws disintegrated upon installation. I had to make a run to the local hardware store to buy adequate screws. But, all that said, it's fine for my purposes. If I had a hardcore workshop with heavy-duty tools that required heavy-duty use, I might consider another product.

This product must be assembled but comes with simple to understand directions that make the job simple. Holes are pre-drilled and this can be assembled with just a Phillips head screw driver, some elbow grease and time. 

I didn't trust the wall hanging anchors supplied and drilled some extra mounting holes to mount to studs in the wall. I have more tools than I can hang on one unit so a second unit is required but it is nice to have quick access to all the tools and batteries in one location. I can put charged batteries on the top shelf and batteries that need charged on the larger shelf with the 2 bay charger. Tools slide into the storage area below the shelf for quick and easy access. One of the best storage devices I have ever owned!

Tool slots are very small, wont fit 18 or 20 volt tools

The system is just as it appears. What the problems are as follows: The hardware is not labeled correctly, the screws I received are not what the instructions list and they are cheap and strip very easily. The second issue is the slots for the tools. If you notice in the photos, the drills are the smaller 12 volt drills. Most people use 18 or 20 volt which have larger motors. My 18 volt Ridgids, Makitas and Dewalts will not fit. They wont fit upright or upside down. This system is completely unusable. I am not sure how but I will be returning this.

Great charging station organizer!!

I installed this on top of my tool chest and it looks awesome. Having multiples drill guns which requires me to have the chargers out and ready to charge the batteries and this station does the great job. The hanging slots are made of 2" PVC pipes sections and sturdy enough for my Milwaukee & Makita drills. I've been wanting to build one like this but after seeing it's being sold, I rather buy it than spend time & material to build it. I'm happy with this purchase. Recommend

Item came disassembled, but it was fairly easy to work on. The predrilled holes are hard to miss and the quality of the materials feels solid. Make sure u have a good base/stud if mounting on a well as the unit has some weight to it. It would be nice if it were to have a pass-through for the wires, but other than that pretty solid item.